[SOLD] Parting 67 Cuda fastback

[DonnieLawson]

Im parting a 67 Barracuda Fastback
fenders & quarters shot , headlight buckets good
good front valance , inner grills , header panel , hood , hood hinges,
dark blue bucket seats need foam & redone , back seat very good condition .
engine , tranny , and radiator gone .
roof , hood very good condition , no dents Hood $150
, trunk lid is dent free but some rust under lip $75
blue sunvisors , $50
blue kick panels , $25
complete dash , dash pad shot . 120mph speedo. no cracks needs refinished $250
All glass great except windshield , $100 back glass
bumpers good for cores $40
bumper brackets . $40
manual steering column , with column shift $50
doors have rust but all there $75
tail light lense pretty good , drivers bezel driver quality , pass side bezel junk.
backup lights pitted bad but straight , lenses good $30
wiring harness....
interior and interior trim
The pics of the dash is the paint pealing , dash is a solid piece

What do you need ?

Located in Middletown Ohio
can bring to Nats
Donnie

 

[DonnieLawson]

more pics
you can respond here , or PM me
Donnie

 

[DRENO]

Would you sell the radio alone?8) if so,how much to R3J 1X9?

 

[rapom65]

Donnie would you consider separating the instrument cluster and bezel from the dash? I have a good dash frame and pad but need the rest. If so can you give me a price and if you would ship to WA state. Thanks, rapom65.

 

[DonnieLawson]

I haven't tried the radio yet , I would rather see someone buy the entire dash . I will sell seperate if the dash buyer doesn't want it.
Also selling core support , firewall , etc
floorboards shot , trunk shot , I do have all 4 hubcaps , bucket seats are very good cores , backs very good shape , back seat very good condition
drive shaft , K member, etc
Donnie

 

[smlveightis]

What would you be willing to take for the bumber jack?

 

[rapom65]

Completely understand wanting to sell dash as a unit. If you do decide to part it out keep me in mind as I'm very interested in the instrument cluster & bezel. Thanks, rapom65.

 

[DonnieLawson]

What would you be willing to take for the bumber jack?

$40 for the jack assembly + shipping
I am going to the Nats that would save on shipping
Donnie

 

[DonnieLawson]

Completely understand wanting to sell dash as a unit. If you do decide to part it out keep me in mind as I'm very interested in the instrument cluster & bezel. Thanks, rapom65.

No problem , if not sold soon I'll contact you
Donnie

 

[DonnieLawson]

heres some requested pics , I will take some more tomorrow
Donnie

 

[smlveightis]

I'm sold on the jack for $40. Do you still have drivers side seat belt retractor, and does it still work? If so, we'll work out a price for both. Shipping to 48185. Unable to go to Nats, just started back to work, 6 days a week.

 

[stan marshall]

How much for the plymouth letters that are on the front panel?
Thanks stan

 

[DonnieLawson]

workin 12 hrs , and had to mow grass till dark after I got in..........
I will get pics of requested stuff , and will check the seat belt retractor for operation
Donnie

 

[DonnieLawson]

Ok , finally got out there to take some pics.
'The seat belt retractor works , but the seatbelt has somewhat of a curve in it from use I guess , and it dosent want to retract all the way , but it will if you guide it.
The window cranks have some pitting , but all the knobs are still on it and will probably look OK if cleaned up for a driver

 

[DonnieLawson]

couple more
Door panels are in pretty good shape , so are the sunvisors

 

[the67fish]

how much for both wing window glasses if willing to seperate from doors? would love to have the doors just for the inside panels and regulators but the shipping wouldnt jive on that LOL

 

[smlveightis]

PM sent.

 

[DonnieLawson]

how much for both wing window glasses if willing to seperate from doors? would love to have the doors just for the inside panels and regulators but the shipping wouldnt jive on that LOL

If doors don't sell , Ill sell them separate
Thanks
Donnie.

 

[white-night]

Hi Donnie,I have sent a P.M Cheers Rob

 

[DonnieLawson]

sale pending on
back glass
dash assy.
back seat
PLYMOUTH lettering
drivers seatbelt retractor
bumper jack
tail lights
front valance

I have a complete wiring harness /6 car good condition
driveshaft
kick panels
grill header panel......... no rust
grills
/6 torsion bars
/6 K member
all 4 door panels in very good condition
front buckets all there , backs are very good condition $150


maybe wheel houses

I'll be at the nats , this would save on shipping
Thanks guys
Donnie



Im still taking car apart as time allows

 

[redfish748]

Donnie,

I am looking for OEM 10" drum front brakes, I need the spindles.
It should have small ball joints.

 

[DonnieLawson]

just the spindles or the entire assembly ? it a /6 manual brake car
I'll check them out
Donnie

 

[MrCuda68]

How does the sheetmetal around the lower edge of the rear window look, and what about the interior trim in the same location?

 

[DonnieLawson]

The sheetmetal is swiss cheese in the lower corners......... The inside trim is good , no bends or dents. You can see on the back side of the trim on the drivers side , where the water dripped thru the rust holes onto the trim peaces .
Very solid , dark blue in color.
I can get pics and post them if interested.

 

[DonnieLawson]

more pics