[SOLD] Parts - All shapes and sizes

[Cazbah362]

Centerline wheels - these are from a 1968 Plymouth B Body (GTX) 4.5 inch bolt pattern, fronts are 3.5 wide, rears are I believe 4.5 back space and 10 inches wide, the have Goodyear slick 30/11.5/15's. they fit with a roll of the fender lip. Front tires will not be going - $500

SB - 727, was good when pulled $75

SB - E Body headers, very beat $10

Late 60 era 833, pads for both E/B Body - $350

A833 OD, aluminum case - $350

R/B Torker II intake fair, $100

SB - Crower 31600 Hydraulic cam and lifters, SB Mopar - $40 (See cam card below)

8 3/4 (8.75) B Body housing with A Body pads and Axles - $200

Factory Rocker arms -

SB - Missing 2 rockers, but all else there, shafts, spacers bolts, rockers - $30

BB (2 sets) -
One set has shafts and rockers - $30

One set complete, rockers, shafts, spacers, bolts - $50

BB - pushrods, factory 2 sets - $15

Factory valve covers - Off 77 truck, decent shape, - $20

Pitman arm - 73 newer, can send pictures - $20

727 Mopar Performance 2 quart pan with adapter - $20

Summit Griffin aluminum radiator - http://www.summitracing.com/parts/gri-8-00038 - used, good shape - $125, radiator cap,

All these are OBO - please PM, I will send you and email. Paypal is best, but will work with you on other ways. If your asking for quotes on shipping, will take me a few days, this is a hobby for me so be patient.

Willing to trade need the following:

SB 340 Exhaust - 70 for AAR clone
340 Block
SB Airgap
742 pumpkin - pig
BB A body oil pan Large capacity


CP

 

[bighammer]

PM'd on the radiator

 

[64dart440]

that a833 is it in working shape

 

[Cazbah362]

Yes, both 833's are in great shape. I was going to use one of them in my 68 GTX, however I found a 18 spline for it. No need for either now.

 

[clinteg]

PM on 727 pan.

 

[Sedanman]

pic of 727 pan?

 

[Abodybomber]

31600 Crower:hyd flat tappet. 110 lobe centers,220@.050,290 adv..460 lift. Nice mild grind,bump.

 

[Cazbah362]

Here is a picture of the pan, it is really good shape along with the filter extension.

Abody - I agree, it is a very nice grind, thanks

Everything is still for sale, lots of nibbles

 

[Cazbah362]

Btt

 

[Cazbah362]

OK - Sold some items still have the following:
Centerline wheels - these are from a 1968 Plymouth B Body (GTX) 4.5 inch bolt pattern, fronts are 3.5 wide, rears are I believe 4.5 back space and 10 inches wide, the have Goodyear slick 30/11.5/15's. they fit with a roll of the fender lip. Front tires will not be going - $500


SB - E Body headers, very beat $10

Late 60 era 833, pads for both E/B Body - $350

R/B Torker II intake fair, $100

SB - Crower 31600 Hydraulic cam and lifters, SB Mopar - $40 (See cam card below)

8 3/4 (8.75) B Body housing with A Body pads and Axles - $100

Factory Rocker arms -

SB - Missing 2 rockers, but all else there, shafts, spacers bolts, rockers - $30

BB (2 sets) -
One set has shafts and rockers - $30

One set complete, rockers, shafts, spacers, bolts - $50

BB - pushrods, factory 2 sets - $15

Factory valve covers - Off 77 truck, decent shape, - $20

Pitman arm - 73 newer, can send pictures - $25 shipped

 

[Cazbah362]

Btt

 

[YY1]

Sold the o/d?

 

[rpmrich]

pm sent