Cazbah362
Well-Known Member
Contact seller
Centerline wheels - these are from a 1968 Plymouth B Body (GTX) 4.5 inch bolt pattern, fronts are 3.5 wide, rears are I believe 4.5 back space and 10 inches wide, the have Goodyear slick 30/11.5/15's. they fit with a roll of the fender lip. Front tires will not be going - $500
SB - 727, was good when pulled $75
SB - E Body headers, very beat $10
Late 60 era 833, pads for both E/B Body - $350
A833 OD, aluminum case - $350
R/B Torker II intake fair, $100
SB - Crower 31600 Hydraulic cam and lifters, SB Mopar - $40 (See cam card below)
8 3/4 (8.75) B Body housing with A Body pads and Axles - $200
Factory Rocker arms -
SB - Missing 2 rockers, but all else there, shafts, spacers bolts, rockers - $30
BB (2 sets) -
One set has shafts and rockers - $30
One set complete, rockers, shafts, spacers, bolts - $50
BB - pushrods, factory 2 sets - $15
Factory valve covers - Off 77 truck, decent shape, - $20
Pitman arm - 73 newer, can send pictures - $20
727 Mopar Performance 2 quart pan with adapter - $20
Summit Griffin aluminum radiator - http://www.summitracing.com/parts/gri-8-00038 - used, good shape - $125, radiator cap,
All these are OBO - please PM, I will send you and email. Paypal is best, but will work with you on other ways. If your asking for quotes on shipping, will take me a few days, this is a hobby for me so be patient.
Willing to trade need the following:
SB 340 Exhaust - 70 for AAR clone
340 Block
SB Airgap
742 pumpkin - pig
BB A body oil pan Large capacity
CP
SB - 727, was good when pulled $75
SB - E Body headers, very beat $10
Late 60 era 833, pads for both E/B Body - $350
A833 OD, aluminum case - $350
R/B Torker II intake fair, $100
SB - Crower 31600 Hydraulic cam and lifters, SB Mopar - $40 (See cam card below)
8 3/4 (8.75) B Body housing with A Body pads and Axles - $200
Factory Rocker arms -
SB - Missing 2 rockers, but all else there, shafts, spacers bolts, rockers - $30
BB (2 sets) -
One set has shafts and rockers - $30
One set complete, rockers, shafts, spacers, bolts - $50
BB - pushrods, factory 2 sets - $15
Factory valve covers - Off 77 truck, decent shape, - $20
Pitman arm - 73 newer, can send pictures - $20
727 Mopar Performance 2 quart pan with adapter - $20
Summit Griffin aluminum radiator - http://www.summitracing.com/parts/gri-8-00038 - used, good shape - $125, radiator cap,
All these are OBO - please PM, I will send you and email. Paypal is best, but will work with you on other ways. If your asking for quotes on shipping, will take me a few days, this is a hobby for me so be patient.
Willing to trade need the following:
SB 340 Exhaust - 70 for AAR clone
340 Block
SB Airgap
742 pumpkin - pig
BB A body oil pan Large capacity
CP