Pic of oil slinger installed?

[sargentrs]

I've read a dozen threads about needing the oil slinger. I replaced my timing chain and don't remember seeing one on it. Now I've got an oil leak and going to pull it again and replace the gasket. After reading through all the threads, I'm a little confused about the orientation of the oil slinger (once I get one) on the crank. Does anybody have a pic of one in place so I make sure I've got it on right? Thanks to all for any help and advice.

P.S. Is this the right one?

http://www.amazon.com/dp/B004SRU8OO/?tag=joeychgo-20

 

[nm9stheham]

The dished side is toward the damper.

The part pix looks right but I don't have a PN to doublecheck for you. IN that Amazon pics, the 'un-dished' side is shown; that would go towards the timing sprocket.

 

[sargentrs]

Then it's like this?

 

[Bonz]

Yup. Now turn it around and you'll understand why.

Then it's like this?

 

[sargentrs]

I can see how the other way would make a helluva racket.....for a little while. Thanks!