possible too adjust ignition key switch in column

[duster72/408]

so i have a 1972 plymouth duster 408 with a electronic msd box and when i turn my key all the way forward the box powers and i start it and let off the key and a split second later the key kicks back a little and kills power too the box killing the car it all runs fine if i put slight pressure on key too keep it from kicking back help me is there any way too adjust it or anything so it doesnt do that or what do i have to replace please help this is urgent:banghead:

 

[sireland67]

Switch is wore out, change it out.
No adjustment

 

[TXDart]

Sounds like a bad ignition switch.No adjustment just need a new switch.
Here a link to a sticky on here:
http://www.forabodiesonly.com/mopar/showthread.php?t=128836

 

[RedFish]

There are 2 separate ign wires from switch, one hot in start, the other hot in run.
Wiring diagrams will show them ign.1 and ign.2.
You might need these 2 wires tied together with that aftermarket ignition system.

 

[duster72/408]

thanks guys where is the best place too get that new ignition switch?

 

[67Dart273]

thanks guys where is the best place too get that new ignition switch?

Did you read what Redfish posted above?