[SOLD] Pulleys and auto flex plates F/S

[Princess Valiant]

PM if you want measurements ......misc pulleys ...not sure what they came off of ........cleaning out around 10 years of being a pack rat

all pulleys and flex plates $5.00 ea. plus SH...ships from Colorado 81001.......most can fit in small flat rate boxes.

i have a ton more flex plates .......so if you have a specific one your looking for PM.

 

[crackedback]

Rani,

Looking for at least a pair of single pulleys that would line up on a SB. I'll see if I can get a measurement.

 

[waggin]

thats a lot of pulleys....kinda

 

[krazykuda]

Do you have any SB 727 flex plates?

 

[Princess Valiant]

Do you have any SB 727 flex plates?

i am most certain i do ........i will check some measures .......but i know i parted a lot cars with SB 727s and im trying to get rid of everything i have auto

 

[72ScampTramp]

Rani any single groove Water pump, Crank and Alt for BB?

 

[Princess Valiant]

i have two single groove crank pulleys they are the same and measure:


the water pump pulley ??? there are a bunch of single groove but they are of different diameters........what engine size you have so i might be able to "mock up" something if i have an engine of same size

 

[72ScampTramp]

I have a 440 Rani. Looking for a single groove crank pully, and water pump and alt pulley I have nothing to compair it too to know.

 

[Kegan B]

Any SB single grooves ?

 

[martin53]

I need a 2 belt pulley for a 1973 318 how much for shipping i need one bad

 

[krazykuda]

i am most certain i do ........i will check some measures .......but i know i parted a lot cars with SB 727s and im trying to get rid of everything i have auto

Let me know how many SB 727 flex plates that you can find, and I'll take them.

Thanks Rani

 

[Princess Valiant]

Let me know how many SB 727 flex plates that you can find, and I'll take them.

Thanks Rani

Pm your address .....you want more than one?? i can get them out to you ASAP


BTW im pretty sure that all 727s are same ....meaning regardless of SB or BB as long as its a 727.......maybe someone can chime in and correct me if thats wrong...

 

[martin53]

Rani how much for a 2 belt crank pulley i can't find one anywhere where i live would you happen to have one

 

[waggin]

there are large bolt pattern flexplates and small bolt pattern flexplates and a flexplate in small bot pattern with and even smaller center whole for pre 67 slant and 273 engines, when i refer to bolt pattern I'm referring to where the pads are mounted on the torque convertor...I have seen both big and small bolt patterns on small blocks.....and in rare cases on a slant six with 727 in a taxicab

Pm your address .....you want more than one?? i can get them out to you ASAP


BTW im pretty sure that all 727s are same ....meaning regardless of SB or BB as long as its a 727.......maybe someone can chime in and correct me if thats wrong...

 

[krazykuda]

I need mostle the post '67 SB plates, and a couple of early ones.

Let me know how much I need to send you.

I will PM my address after I get back from the Nat's this weekend.


Thanks Rani

And Waggs for the info.