Quick one: interior disassembly

[simon325e]

Guys,
I am in the process of dismantiling my 68 notch. I remember how to take out most stuff but forgot how to remove the top of the back seat. Anyone able to give me some quick instructions?

How about a recommendation for a good resource for this sort of thing (service manual, etc) and place to get?
Thanks!

 

[BrianT]

I believe most rear seats are held in the same. Bottom push back and then pull up. Once the bottom is out, look under the back. There should be a tab from the body that goes through a loop in the seat frame and then bends over. Straighten the tab and that releases the bottom of the back. Lift straight up and the back should come free.

 

[simon325e]

Yeah that was the ticket- thanks!

Bonus: Found the second broadcast sheet- woohoo! It's much more complete than the first.

 

[RedFish]

Cover the hazzards. The hooks in the floor that held the seat bottom down will eat your knees. A empty tuna can with 2 small holes drilled in it for a wire tie to go through will work. Stick a piece of duct tape over those other sharps. Have fun.