Rad offset

-

Dragnut

Well-Known Member
Joined
Apr 28, 2016
Messages
361
Reaction score
188
Location
Pottstown Pa.
So why did Dodge offset the drivers side Rad support by an inch?

A97F0F51-E4D8-455A-A6AE-E8CCA57DBD9D.jpeg
 
Look deeper.

The engine is offset to clear the steering box & column.
 
The radiator will be pretty much square with the fan. The drive line is shifted to a angle so the entire chassis is a little bias. The body is corrected to square. You found a spot where the correction is accomplished. One spot were they didn't correct the body is rear wheel wells. One rear tire sits closer than the other.
 
-
Back
Top