dartfreak75
Restore it, Dont part it!
Yes I remember you are the one that told me about you building them! Thanks for chiming in.
Yes I remember you are the one that told me about you building them! Thanks for chiming in.
I actually bought an extra set cheap on ebay to try this with.I bought the front kick panels that have been designed to accept speakers from Classic. No cutting anything and I still have the stock kick panels to go back to if I want. I bought the ones designed for the 4x6 speakers.
View attachment 1715268567
How do you build the bluetooth amplifier box? What all do you need to assemble one.
They make a Bluetooth audio board. I couple it with a low-level audio converter to allow the factory radio to play through the Bluetooth amplifier. This box also will allow you to mount it underneath the package tray (if you're not connecting the factory radio to it) you just supply 12 volts to it, connect the speakers and you can pretty much have a Bluetooth amplifier with very little wiring required. You will also need some RCA plugs, standoffs and a box to mount it in.How do you build the bluetooth amplifier box? What all do you need to assemble one.
Recently I've had 3 or 4 old car radios come across my bench for repair and I didn't fix them due to worn out tuning clutches. The replacement is now impossible to find, but there are guys out there claiming they can restore them.
I'm going to let one of the mechanical engineers I work with take a look at a radio clutch this week and see if he can come up with a fix.
I'd like to hear more. What kind of glue?I solved that problem by inserting a piece of sandpaper (delicately) between the round clutch disks and gluing it on. It's working fine so far.