Rally Wheels

[Ragmanx]

I'm looking to buy a set of original 14" rally wheels for my '64 Dart GT convertible, to replace the stock 13" wheels and hubcaps.. These have the correct lug spacing of 5x4". I think they should bolt right onto my hubs.
I'm looking for a size the would serve well for just cruiseing and car shows.
What tire size would you suggest?
Thank you,
Steve

 

[4spdragtop]

I would go with 15" personally. Better chk to see if you can get 14's.
Cool ride!

 

[Ragmanx]

Thanks, but 14" is the set he has.

 

[toolmanmike]

I'm looking to buy a set of original 14" rally wheels for my '64 Dart GT convertible, to replace the stock 13" wheels and hubcaps.. These have the correct lug spacing of 5x4". I think they should bolt right onto my hubs.
I'm looking for a size the would serve well for just cruiseing and car shows.
What tire size would you suggest?
Thank you,
Steve

View attachment 1716481097

View attachment 1716481098

No wider than 7" with a 4.5" backspace in the rear. 6" on the front (the factory wheels were 5.5") 2.25 60's on the rear work well. 185's on the front. Bigger ones may work but you may have to trim.

 

[Ragmanx]

My Dart convertible GT now has 13"red walls with stock hubcaps and look fine.

I'm torn between staying put, or switching to 14" MoPar rally wheels.

I have access to four 14", small lug (4") Rallys in great condition with OK tires. The seller is asking $600 plus my wheels on swap.

Does any one have an opinion to share about this swap?

Any and all insights will really be appreciated.

Thank you,
Steve

Pic of my car as is attached again.

 

[toolmanmike]

A wheel change can make a big difference.

 

[66fyssh]

I feel like that's a little steep, but it is 2026 and they aren't making any more 14" to my knowledge.

I would offer less, maybe $400 for the set and be prepared to pay $500.