Re-bushing a AFB carb

[toolmanmike]

Does anyone know who does a good job re-bushing a AFB carbs throttle shafts?
My original carb idles like poop and my Edelbrock that ran good last year isn't too cherry either. I have to adjust the idle mixture screws at least an extra turn rich just to get it to idle and the exhaust is gassy rich. Every time I stop at a light it idles at a different speed. When I overhauled the carb a few weeks ago, there was a lot of space and a poor fit of the primary butterfly's in the bores. Mike

 

[toolmanmike]

Bumpety bump.

 

[redfastback]

If you take it to a machine shop, they can mill it out and make a brass/bronze bushing for it.

Call the carb shops

http://www.thecarbshop.com/

http://www.thecarburetorshop.com/

 

[toolmanmike]

I checked both of the sites out. Thanks for the info. MIke