Dec 16, 2022 #1 7 73stroked duster Well-Known Member Joined Sep 7, 2016 Messages 61 Reaction score 3 Location streamwood are there no pins on the wheel cylinder on a 9 inch drum
Dec 16, 2022 #2 niceolddart FABO Gold Member FABO Gold Member Joined Dec 19, 2014 Messages 1,772 Reaction score 1,535 Location S.E. Pa. There should be, I think.
Dec 16, 2022 #3 66fyssh Don't Stop Believin' FABO Gold Member Joined Jun 22, 2013 Messages 8,702 Reaction score 10,228 Location Navarre, Florida There was a thread that covered this a while back. 9" drums did not use pins in the wheel cylinder. I'll see if I can find it. I don't have personal experience with 9".
There was a thread that covered this a while back. 9" drums did not use pins in the wheel cylinder. I'll see if I can find it. I don't have personal experience with 9".
Dec 16, 2022 #4 66fyssh Don't Stop Believin' FABO Gold Member Joined Jun 22, 2013 Messages 8,702 Reaction score 10,228 Location Navarre, Florida Found the thread. The OP posted a picture of how the shoe nub fits against the wheel cylinder. Post 15 and 22 are good. Brake Shoes sitting wrong
Found the thread. The OP posted a picture of how the shoe nub fits against the wheel cylinder. Post 15 and 22 are good. Brake Shoes sitting wrong