Rear seat belt location

[olddog12]

So I have a '73 Scamp, and as you can see from the picture I dont have a mounting point for the rear seat belts, I didnt remove them so dont know where they need to be. Can anyone shed some light as to where the hole needs to be at?

 

[halifaxhops]

If they are the same as a 74 dart I have the seat out and could shoot some pics.

 

[zkx14]

Here's a pic of my '75 Duster, complete with crud from when I first pulled the seat.

 

[halifaxhops]

They look like my 74 SE. There are no mounting points at all in the scamp?
I am kind of lost on the question I guess. Have a pic of the Scamp's rear seat location?

 

[olddog12]

Oops! I forgot to add the picture. This may help halifaxhops.

 

[halifaxhops]

OK now I follow you looks like where that plate is welded on. Was that all rot? If it would help I could measure it on mine with some pics if they are the same, not sure.

 

[olddog12]

Yes a measurement & pic would be great! I assume it was rot yes, it was already done when I bought it as you see in the photo.

 

[halifaxhops]

Need the center ones also? Or just both sides. Prob do it tomorrow it is brutally cold here today.

 

[olddog12]

Just the side ones sir. I here ya on the cold out too! Tomorrow is perfect.

 

[zkx14]

I had a similar problem on the passenger side. I still had the studs, but backer plate was rotted away with the wheelhouse. Had to make new ones. Here's a pic from the archives...

 

[halifaxhops]

I am going to have to take the measurements Thursday.

 

[halifaxhops]

Of course my camera took a dump. give me a place to take the measurements from.

 

[olddog12]

From the passenger door skin, on either side, to center of bolt hole and from the floor up to the center of the hole, that sound about rite?

 

[Dusterdenovo]

here's a couple of pix from my 73 Duster. Should be comparable.

Notice that they're studs. Hope this helps.

 

[halifaxhops]

I get 3 from the side and just underr 2 uo. Looks like the duster pics.

 

[zkx14]

Here's another shot I found. Do you think they used enough sealer? LOL

 

[halifaxhops]

Yes there is a lot of it on mine also everywhere. I wonder if they take that into account for the GVW?

 

[olddog12]

Thanks for the replies everyone, much appreciated!