Rebuilding my 69 Dart suspension

[kustom2k1]

Anyone have photos of what the 69 Dart front suspension looked like from the factory? I have the front suspension disassembled and ready to powder coat, would like to get it as close to factory as possible...Thanks in advance, Eddie

 

[1969dodgedartgt]

not sure what your looking for, but heres some pics, hopefully helpful

I'm not sure mine is all stock, I know the link-ends I put in are not.... ignore the deteriorating rubber, it will be replaced in the next couple months when I get some money from my new job. I'll be doing a rebuild myself, so maybe you can let me know of any troubles you had/ hard parts. are you using a PST kit or what?

let me know if you need to see a certain part/area.

 

[1969dodgedartgt]

oh wait, all you need is the service manual. Plenty of pics in there.

find it here (towards the bottom of the thread)

 

[kustom2k1]

Hey 69DDGT, thanks for the link always good to have that kind of info. I would like my front end suspension pieces to look as close to factory as possible, control arms etc. I will find out what kit was used.
The powder coating just needed some reference as to the look. Going to go with this I guess...

 

[1969dodgedartgt]

oh, i misunderstood....
gl

 

[1968FormulaS340]

Some pics can be found here.

http://www.mmcdetroit.com/ICCA/References/Chassis/

 

[kustom2k1]

Thank you 68F, I found a 1967 Dart in amazing condition thats near flawless on ebay WOW, this is what im talking about
http://s1123.photobucket.com/albums...204%20ebay/?action=view&current=GTS-67_22.jpg

 

[1969dodgedartgt]

wow now that is new

 

[CudaChick1968]

Hey 69DDGT, thanks for the link always good to have that kind of info. I would like my front end suspension pieces to look as close to factory as possible, control arms etc. I will find out what kit was used.
The powder coating just needed some reference as to the look. Going to go with this I guess...

Sounds like you could use a Mopar specialist. :-D

 

[abodyjoe]

Anyone have photos of what the 69 Dart front suspension looked like from the factory? I have the front suspension disassembled and ready to powder coat, would like to get it as close to factory as possible...Thanks in advance, Eddie

what do ya want the colors?

 

[abodyjoe]

if your looking for the proper colors then look through this thread. its about as good as it gets...

http://board.moparts.org/ubbthreads/showflat.php?Cat=0&Number=6156475&page=0&fpart=all&vc=1





.

 

[abodyjoe]

a few pics from the thread. there are a ton of pictures there...

gold color does not go all the way to the end...

 

[kustom2k1]

That is beautiful, I think the undercarriage should just as good as the body. Thanks for the pics...now I need to find out what the markings are and where they go!