Replacement body panels "which ones"

[dusterman79]

Hey fellow A-Body lovers. I am going to be putting a new full floor pan and lower quarter patch panels on my 74' Duster. I found Classic Industries is cheaper in price than Year One. I recently found that Summit sells these too. The brand Classic sells is "Restorers Choice" The brand Summit sells is "Good mark" if I recall. I'm not a rich cat, so I must search for the best deal. It seems that the floor pan in Classic runs about $429 and the quarter patches run about $154 each all minus the oversized freight shipping charge. Now the floor pan from Summit runs about $400 and quarters run about $100 each again all minus shipping. Who has used both, and has some feedback on what product to purchase? I know somebody has used both and had bad luck with each. If anyone can chime in here, I would greatly appreciate the feedback.

 

[440abody]

Amd! Nuff said!

 

[1968FormulaS340]

Always go with the best used panel you can find, next would be AMD.

 

[dwire67]

If nobody else told you AMD

They are the best

 

[Woods74]

Search will reveal Sherman, and AMD.

 

[Tbone416]

AMD's are alsome but not quite as good as factory one's.

 

[Inertia]

Search will reveal Sherman, and AMD.

I got 2 Sherman rocker panels,, one was good,, the other was a mile off..

Took the good one to a sheetmetals shop, and had them bend a "reverse" of the good one..