[SOLD] Sb weiand tunnel ram, complete!

-
Status
Not open for further replies.

whitepunkonnitro

Well-Known Member
Joined
Dec 6, 2011
Messages
14,798
Reaction score
890
Location
Murfreesboro Tn
Rating - 98.2%
162   3   0
Contact seller
This is a real nice package that is pretty much plug and play. I say pretty much, because I have no idea about the internal condition of the carbs, and I personally would go through them before running gas through them...then again they might be perfect!
Manifold is a Weiand, carbs are 600 Vacuum Secondary Holleys, and the nice thing about this set-up, is that EVERYTHING you need to bolt it on and go is there. Holley Regulator used as a splitter, hard fuel lines, carb linkage, throttle bracket,etc...no hunting down or fabricating anything!
Need to get $500 plus the ride. I can break it down and get at least that in parts, but this is too sweet to chop up.
PM me if interested. Thanks FABO!
 
7304980894_a9838046b4_m.jpg
Pics
 
sure would like it, but still have lots of other parts to buy. besides, I don't think my set up could handle 1200 cfm's.

good deal hellofva price. glws it wont take long.
 
What's the total height, if you could measure when sitting from the flat surface to the top of the carbs (front and back) that would help me decide. Thanks
 
Status
Not open for further replies.
-
Back
Top