I have a 1973 340 .040 over, J heads, KB Performance Hypereutectic Pistons, forge chrome-moly eagle rods, stock crank (i don't know if its forge or cast, I read that it was a shoot peaned* crank), small cam similar to the factory cam (couldn't tell you details on lift or duration), the motor is runnning maybe 10.5-12 to 1 compression and I don't know what else to put for specs.
I was wondering if I could run a twin turbo on it,
something like http://www.turbobygarrett.com/turbobygarrett/catelog/Turbochargers/GT28/GT2860RS_739548_5.htm.
Pushing 15 to 20 lbs of boost.
If i can't run boost what do i need to change to run boost?
if there is anything else i should know if you could let me know that would be great.
Thanks
I was wondering if I could run a twin turbo on it,
something like http://www.turbobygarrett.com/turbobygarrett/catelog/Turbochargers/GT28/GT2860RS_739548_5.htm.
Pushing 15 to 20 lbs of boost.
If i can't run boost what do i need to change to run boost?
if there is anything else i should know if you could let me know that would be great.
Thanks