Show That Lowered A-body!

-
This shows a 245/45/18 wheel with the suspension sitting on the bumpstops. This is not feasible with the factory suspension without keeping the fender well above the tire. It might be close with a narrower wheel. This one is 8.5 or 9". (edit: 8" with 6" backspace that I adjusted to 5.7" with spacers). The section width of the tire is 9.5".

Lots more pics exploring the limits in my build thread starting with post #30.

http://www.forabodiesonly.com/mopar/showthread.php?p=1969806924#post1969806924

The earlier info by autoxcuda was basically verified on my Dart, except that no fender mod would be necessary.
 

Attachments

  • wheel test on stop.jpg
    119.9 KB · Views: 2,386
Idaho said:
This shows a 245/45/18 wheel with the suspension sitting on the bumpstops. This is not feasible with the factory suspension without keeping the fender well above the tire. It might be close with a narrower wheel. This one is 8.5 or 9".

Lots more pics exploring the limits in my build thread starting with post #30.

http://www.forabodiesonly.com/mopar/showthread.php?p=1969806924#post1969806924

The earlier info by autoxcuda was basically verified on my Dart, except that no fender mod would be necessary.
Click to expand...

What's the backspacing on that rim?

What is the exact rim width?
 
just saw this thread, so here ya go....

some guys wanted to see these on the car once i got them mounted, so here's some pics.

they're 17x7 streeters w/4.25 bs sbp. tires are 205/45/17 frts, and 245/45/17 rears.

the car has an 8 3/4 axle out of a 68 barracuda, and has been lowered 2 inches. other than that there are no mods....total width of the rear tires is 9.4 inches, frts. are 8.10 inches. there are no problems with the fitment.

i actually thought the frt. tires would be a little taller, they were advertised at 24.3 inches, but came in at 24. rears are 26 inches.

hope this answers some questions with these wheels on an early a.
higgs
Attached Images
attachment.jpg


attachment.jpg


attachment.jpg


attachment.jpg


attachment.jpg


attachment.jpg


attachment.jpg
 
the beater...View attachment car.jpgit wears the stock front wheels and 195 x70 14 tires the rears are dodge diplomat 15 x 7 235 15 bf drag radials.or cop wheels with 26 x 10 m/t et drag slicks. mancini leafs and 2 inch lowering blocks to get the wheel and wheelwell at the same spot. might have to take the blocks out if it doesn't launch good.
 
hollywood hig said:
just saw this thread, so here ya go....

some guys wanted to see these on the car once i got them mounted, so here's some pics.

they're 17x7 streeters w/4.25 bs sbp. tires are 205/45/17 frts, and 245/45/17 rears.

the car has an 8 3/4 axle out of a 68 barracuda, and has been lowered 2 inches. other than that there are no mods....total width of the rear tires is 9.4 inches, frts. are 8.10 inches. there are no problems with the fitment.

i actually thought the frt. tires would be a little taller, they were advertised at 24.3 inches, but came in at 24. rears are 26 inches.

hope this answers some questions with these wheels on an early a.
higgs
Attached Images
Click to expand...

Ha! I love that! The blackout on everything looks so mean!
 
A little update on mine
 

Attachments

  • 2001_04030005.jpg
    73.6 KB · Views: 2,189
To my eyes, the early As when lowerered go from ehhhh...
to way cool.
 
I agree 100% had no interest in the early A's until I saw one lowered. That's when I got the bug for one.
Idaho said:
To my eyes, the early As when lowerered go from ehhhh...
to way cool.
Click to expand...
 
Couple pics of mine. Turned down torsion bar adjuster up front, 1" torsion bars, SS springs in back with drilled front spring hanger. Still has some rake to it, 225/50 in 17*7 up front, 275/50 on 17*8 on back.
 

Attachments

  • ScreenHunter_37 Jan. 20 18.00.jpg
    51.4 KB · Views: 3,044
  • ScreenHunter_36 Jan. 20 17.59.jpg
    44.5 KB · Views: 2,200
pics
 

Attachments

  • ScreenHunter_50 Jan. 20 21.59.jpg
    111 KB · Views: 2,067
  • ScreenHunter_49 Jan. 20 21.58.jpg
    159.6 KB · Views: 2,090
  • ScreenHunter_48 Jan. 20 21.58.jpg
    97.1 KB · Views: 2,045
  • ScreenHunter_47 Jan. 20 21.58.jpg
    85 KB · Views: 2,064
  • ScreenHunter_46 Jan. 20 21.48.jpg
    79.3 KB · Views: 2,070
  • ScreenHunter_45 Jan. 20 21.46.jpg
    91.3 KB · Views: 2,129
hollywood hig said:
just saw this thread, so here ya go....

some guys wanted to see these on the car once i got them mounted, so here's some pics.

they're 17x7 streeters w/4.25 bs sbp. tires are 205/45/17 frts, and 245/45/17 rears.

the car has an 8 3/4 axle out of a 68 barracuda, and has been lowered 2 inches. other than that there are no mods....total width of the rear tires is 9.4 inches, frts. are 8.10 inches. there are no problems with the fitment.

i actually thought the frt. tires would be a little taller, they were advertised at 24.3 inches, but came in at 24. rears are 26 inches.

hope this answers some questions with these wheels on an early a.
higgs
Attached



attachment.php
Click to expand...


:cheers: That is really sharp! Awesome car.
 
Heres my 74 Dodge Dart Sport Hang 10! Dropped 1.5" in the front. 3" blocks in the back. KYB shocks all around. Getting ready to install aldder bars and coilovers next weekend!
 

Attachments

  • photo.JPG
    97 KB · Views: 2,127
I love the look of these cars lowered and I actually like some of the rims but I gotta say I would never drive one in a million years.

Why? Because my Dart doesn't always stay on the road :D
 
You must log in or register to reply here.
-

Back
Top