Show That Lowered A-body!

-
First of all Wracks71...GREAT paint job!
secondly Tincup REALLY cool car!
Third Mopardaddy...Thanks for the kudos, the entire build is in members restorations under Birth of the Blue Missile.

Here is a rendering done from a digital image by the paint artist. He still has to include the original striping from the Missile but he got the flame job correct. Its starting to come together.
Andrew
 

Attachments

  • Blue Fire Duster Side.jpg
    86.7 KB · Views: 2,135
First of all Wracks71...GREAT paint job!
secondly Tincup REALLY cool car!
Third Mopardaddy...Thanks for the kudos, the entire build is in members restorations under Birth of the Blue Missile.

Here is a rendering done from a digital image by the paint artist. He still has to include the original striping from the Missile but he got the flame job correct. Its starting to come together.
Andrew

Nice
 
Thanks Z. Front end is borgeson steering box, 1.04s, bilsteins, SPC upper arms, Delrin control arm bushings, rms strut rods, 13" front brakes (soon to be 14s).
 
My 71 dart, Want it lower but can't go any further at this point without something rubbing. Bottom of my TTI headers already have the Ceramic scraped off.
 

Attachments

  • 6240_100242216655782_314060_n.jpg
    93.2 KB · Views: 1,810
  • 13745_104213689591968_3743933_n.jpg
    97.7 KB · Views: 1,961
Here's mine!
SAM_0106.jpg


SAM_0104.jpg


Sits a tad bit lower right now but I've got plans muhaha lol
 
You wanted low? Here's my 74 dart spurt, factory socks n springs in the rear with a lil weight, gonna be Latin on the ground in the future

SSPX0085.jpg
 
My 74 Swinger stock /6 springs and bars. Bars cranked down and 360 dropped in
 

Attachments

  • 1974 Dart Swinger 10-1-12.jpg
    78.2 KB · Views: 1,907
  • ABA 1-1-13 3.jpg
    85.3 KB · Views: 1,818
The "Black Car" as we call her - is my wife's 64 that I built for her back in 1996. Originally 273/pushbutton, now running fully built 340, custom converter and full prepped original 904 (pushbutton still). Swapped in an a-body 8 3/4 rear at time we did the motor. Also built custom headers (tri-y style) and modified the trans x-member for exhaust (ground) clearance. The front is just re-adjusted t-bars, rear I flipped over the original front spring hangers (modified the mounting holes on the frame). Running 15x4 front, 15x7 rear Centerlines with the original SBP (5x4) - yes, the front has KH disc (front brakes and rear end out of 70 Dart) and 185/65/15 f, 245/60/15 r tires.:burnout:
 

Attachments

  • 1964PlymouthBarricuda.jpg
    97.5 KB · Views: 1,817
  • DSC03188.jpg
    143.8 KB · Views: 1,854
Lol that's awesome! I love it



That is a 65. Maybe a 64 with 65 front clip....

Actually ALL 64 (really 64 1/2) Barracudas are based on 65 body /trim. Only differences are the dash is 64 and they all had small (6 cyl) radiators in 64 v8 cars. The earliest cars (first 800+/-) had a Valiant emblem on the tail panel. Thanks!!!
 
Have been looking thru files, and found another pic of the Black Car while at Spring Fling in Van Nuys few years back. Yep, the car next to us (right side of pic) is Mike Ritz 66 Team Starfish. Known Mike for , well, "awhile".
Dave:D
 

Attachments

  • P4210067.jpg
    167.9 KB · Views: 1,778
Actually ALL 64 (really 64 1/2) Barracudas are based on 65 body /trim. Only differences are the dash is 64 and they all had small (6 cyl) radiators in 64 v8 cars. The earliest cars (first 800+/-) had a Valiant emblem on the tail panel. Thanks!!!

Ah ok. I thought they had the big "v" valiant fenders
 
about as low as i could go :D
 

Attachments

  • 224070_10151184791202909_1554718467_n.jpg
    166 KB · Views: 1,802
  • 28571_1246107285926_1626742584_512085_75948_n.jpg
    111.9 KB · Views: 1,790
First of all Wracks71...GREAT paint job!
secondly Tincup REALLY cool car!
Third Mopardaddy...Thanks for the kudos, the entire build is in members restorations under Birth of the Blue Missile.

Here is a rendering done from a digital image by the paint artist. He still has to include the original striping from the Missile but he got the flame job correct. Its starting to come together.
Andrew

thanks! the bottom is just primer.
 
-
Back
Top