[FOR SALE] Slant 6 Long Rod Pistons

[RustyRatRod]

This is a nice set of pistons for the 198 long rod for the slant 6. They are new and never run. They were used for mock up only. They are standard bore for the 2.2 Chrysler 4 cylinder which is 3.445. They can get compression from a true 8.5 to about a true 9.5 depending on your build. Specifics about them are here:

CHRYSLER Silvolite 1291H.STD Silv-O-Lite Hypereutectic Pistons | Summit Racing

Free Shipping - Silv-O-Lite Hypereutectic Pistons with qualifying orders of $109. Shop Pistons at Summit Racing.

www.summitracing.com

These pistons however, are press pins only. New pistons complete with new pins. Summit has them for 138 for a set of four. I will do 150 shipped to the lower 48 for these. I am selling these because I needed more compression for the large camshaft I plan to run. Located in middle Georgia. Thank you.

 

[RustyRatRod]

Bump. You have to buy two sets to get six since they're sold in fours. This is saving you money.

 

[RustyRatRod]

Bump.

 

[RustyRatRod]

Bump.

 

[Charrlie_S]

Are you sure they are press pins only? According to the link you posted they are pressed or floating, and the picture shows the snap rings. The oem dished turbo pistons are floating.

 

[RustyRatRod]

Are you sure they are press pins only? According to the link you posted they are pressed or floating, and the picture shows the snap rings. The oem dished turbo pistons are floating.

These are press fit.