Good thread. I appreciate all the help that T/A got, good sound info that identified the problem. I learned a little too, I’m not very well versed on rear disc, but I understood every word of this. Thanks guys, and good luck with the car!
Soft pedal first push
- Thread starter TA head 69?
- Start date
-
Fronts can do it too if your using calipers with square cut seals
Common on gm cars in the 80s
Common on gm cars in the 80s
TA head 69?
Well-Known Member
Using 73 a body fronts. Making heat shields for the blower today!
TA head 69?
Well-Known Member
Done. Repurposed auto console.
TA head 69?
Well-Known Member
Console. Utilized 2 trailer 5 pin harness loops. 2 plugs, unplug msd, 3 screws. Console comes out. 3 minutes max.
408scamp
Member
Completely off topic, what seats are you using?
TA head 69?
Well-Known Member
Corbeau. Not to expensive. Very comfortable. Buy the corbeau sliding brackets with the seats. Weld bolts to the bottom of the brackets going thru the floor. Will make install and removing the seats much, much easier than loose bolt as the seat tract to seat are directly above the bracket to car mounts. Trust me. Cheers!
TA head 69?
Well-Known Member
Oh ya. I bought the economy seats. There are no thru seat crotch belt provisions. Used a razor blade and cut a slit between the panels. Works fine.
-
Similar threads
