sourcing 904 kickdown linkage

[Rapid Robert]

70 904.how should I go about locating some kickdown linkage for this trans? want ad? dealer? thank you for your time. RR

 

[Dana67Dart]

Is it going on a factory 4 BBL or 2 BBL or aftermarket carb?

@Oldmanmopar has had parts in the past

 

[Rapid Robert]

rochester 2bbl

 

[toolmanmike]

70 904.how should I go about locating some kickdown linkage for this trans? want ad? dealer? thank you for your time. RR

Any parts you need, new or used, post a wanted thread here.

 

[Professor Fate]

rochester 2bbl

Should be able to make the dime-a-dozen factory Mopar 2 bbl. linkage work, once the throttle cable is located properly to the carb lever.

 

[Dana67Dart]

There are 2 different trans levers, one for 4 BBL and one for 2 BBL.

The length is different as the ratio on the z bar or the carb is different.

 

[MoparLeo]

Everything is different length between factory 2 bbl. and 4 bbl. Even more difference if using aftermarket intake.

 

[Rapid Robert]

good info, thanks guys, I'll get after it. RR