Dec 26, 2010 #1 C Challenger Well-Known Member Joined Feb 15, 2009 Messages 366 Reaction score 17 Location hallsville mo is it possible and ok to pull hub on water pump shaft out towards the front to get pullys to match need about 3/16 more forward?
is it possible and ok to pull hub on water pump shaft out towards the front to get pullys to match need about 3/16 more forward?
Dec 26, 2010 #2 the67fish Well-Known Member Joined Sep 14, 2009 Messages 1,042 Reaction score 37 Location Fort Worth Texas I have never heard of anyone doing that but they do have spacers to put between there and the pulley to space it out. I think Summit has em and www.440source.com has em
I have never heard of anyone doing that but they do have spacers to put between there and the pulley to space it out. I think Summit has em and www.440source.com has em
Jan 23, 2011 #3 O oldkimmer FABO Gold Member FABO Gold Member Joined Nov 11, 2006 Messages 24,261 Reaction score 8,435 Location Kindersley, Saskatchewan, ................i've did it b 4......i've also seen them pressed on further...not a fan of it though.......kim.........
................i've did it b 4......i've also seen them pressed on further...not a fan of it though.......kim.........
Jan 23, 2011 #4 green1 Well-Known Member Joined Dec 6, 2008 Messages 4,639 Reaction score 61 Location Orange Park, Fla I just made a spacer for between hub and pulley.