Speedometer question: 1960 Valiant

-
Gadabout

Gadabout

Active Member
Joined
Mar 24, 2024
Messages
29
Reaction score
20
Location
Chopsticks#1
The needle is missing, so assuming the entire unit needs to be replaced. Question is do I go with this junkyard find and hope it works or go with this apparently NOS Wagner unit? A 100% restore is not critical to me, but I'd like to keep the visual integrity the same, by having the center cover intact. Thank you in advance for advice.

s-l960.png


s-l1600 (2).jpg
 
If the used cluster is cheap try it

But the new one looks really good, might make your other gauges look bad?
 
bcschief said:
That speedo looks the same as a 63-64 Valiant, see if there is a part number on the back.
Click to expand...
The cluster is 260, the NOS is 250. My concern, is the NOS going to fit nicely into the cluster, or is it not? The junkyard cluster, is well, might I be buying a piece of junk? I am leaning towards the NOS. If it doesn't fit, well I can return it. Talking it out, I am answering my own question.
 
Gadabout said:
The cluster is 260, the NOS is 250. My concern, is the NOS going to fit nicely into the cluster, or is it not? The junkyard cluster, is well, might I be buying a piece of junk? I am leaning towards the NOS. If it doesn't fit, well I can return it. Talking it out, I am answering my own question.
Click to expand...

20240324_220314.jpg
 
Most wrecking yards have a guarantee that their parts work. You might also check with Instrument Specialties to see what it would cost to repair your speedometer.
 
Thanks for the tip. I didn't even know about instrument specialists. Hoping it's just the gauge, and not something in the gearing that transmits the rotations. But, I ordered the NOS one, and if it doesn't fit, back it goes. It looks similar and is supposedly an accurate replacement.
 
The only real gearing is for the odometer. The speedometer is a spinning shaft with a magnet on the end that sits close to a steel shell with the needle attached to it. Usually the bushing on the shaft wears out allowing the magnet to hit the shell causing it to jump around and break the needle.
 
OH, wow. So not just a cable and an odometer, I should be looking for a bushing. What would it be called, for a Google search? A speedometer bushing?
 
It's probably not available as a replacement part, and I wouldn't want to try to replace it myself without the specialty tools needed.
 
You must log in or register to reply here.
-

Back
Top