MR4V
Well-Known Member
I have a 1973 Duster with larger ball joint control arms & SBP wheels. I,m fitting up Wilwood brakes & the caliper mounting braket wont line up on the spindle.
I have checked the Wilwood kit & the braket part number is correct, I, starting to think that these spindles have been drilled out to take the large ball joints.
What spindles do I have?
As you can see below the mounting braket is not even close.
The kit number is 140-11019 & the spindle is completly different in their assembly instructions
[ame]http://www.wilwood.com/PDF/DataSheets/ds765.pdf[/ame]
These are the drum brakes it came with.
Help me sort this out as it's doing my head in.
I have checked the Wilwood kit & the braket part number is correct, I, starting to think that these spindles have been drilled out to take the large ball joints.
What spindles do I have?
![KarlsEBay308_zpsfe1c4db3.jpg](http://i131.photobucket.com/albums/p291/MR4V/Duster%20414/KarlsEBay308_zpsfe1c4db3.jpg)
![KarlsEBay310_zpsf107838a.jpg](http://i131.photobucket.com/albums/p291/MR4V/Duster%20414/KarlsEBay310_zpsf107838a.jpg)
![KarlsEBay311_zps804d2e03.jpg](http://i131.photobucket.com/albums/p291/MR4V/Duster%20414/KarlsEBay311_zps804d2e03.jpg)
As you can see below the mounting braket is not even close.
![KarlsEBay312_zps0a9e3c44.jpg](http://i131.photobucket.com/albums/p291/MR4V/Duster%20414/KarlsEBay312_zps0a9e3c44.jpg)
The kit number is 140-11019 & the spindle is completly different in their assembly instructions
[ame]http://www.wilwood.com/PDF/DataSheets/ds765.pdf[/ame]
These are the drum brakes it came with.
![KarlsEBay150.jpg](http://i131.photobucket.com/albums/p291/MR4V/KarlsEBay150.jpg)
Help me sort this out as it's doing my head in.