[SOLD] SRP/JE pistons & Sealed Power Rings - small block

[Locomotion]

* SRP / JE Flattop Pistons 142070
Small Block Mopar - NEW
- 4.040" bore
- 3.580" stroke
- 6.125" rod length
- 1.670 Compression Height
- Piston weight - 496 grams
- 1/16"-1/16"-3/16" ring grooves
- includes wrist pins & double spiro-locs

$416.00 including shipping from Florida 32117 within the 48 states.

* Total Seal Piston Rings CRG3690-45 - NEW
- 4.04" bore size
- + .005" for file fitting
- 1/16" Ductile iron/Plama-moly top rings
- 1/16" Cast iron second rings
- 3/16" Stainless steel oil rings
- low tension oil rings (11 lbs)
- for pistons listed above.

$95.00 if bought with pistons or $105.00 without including shipping from Florida 32117 within the 48 states.

 

[68gtxman]

Would these be .030" over for a 340? Are they forged or cast?

 

[70aarcuda]

Would these be .030" over for a 340? Are they forged or cast?

Forged pistons for a 360 +.040

can tell by 3.58 stroke and 1.67 compression height.

 

[Locomotion]

Would these be .030" over for a 340? Are they forged or cast?

...what 70aarcuda said.

OEM 340's come with a 4.04" bore, so one could put a 3.58" (360) stroke crank with the smaller 340 mains in a 340 block and use these pistons - if the bore isn't worn. But typically they would be used in a 360 (OEM 4" bore) with a .040" overbore.

 

[CUDACOX]

Good deal.