rymanrph
Well-Known Member
My steering column is not constructed correctly. There are two screws that look like they should hold the collar onto the column, but there is nothing for them to screw into. I can stick a screw driver completely in the hole and never touch anything on the other side.
In this picture you can see one of the two screws and holes I'm referring to.
Here is the gap that should be closed by these two screws (I assume). The only thing right now that's keeping this gap somewhat small is the steering wheel itself.
What am I missing?
In this picture you can see one of the two screws and holes I'm referring to.
Here is the gap that should be closed by these two screws (I assume). The only thing right now that's keeping this gap somewhat small is the steering wheel itself.
What am I missing?