pikewi Comfortably numb Joined Oct 18, 2010 Messages 249 Reaction score 133 Location WI Sep 5, 2015 #1 68 Cuda PS steering gear. I am removing it. Is there more than the 2 bolts and arm? Always seems to be something hiding on me
68 Cuda PS steering gear. I am removing it. Is there more than the 2 bolts and arm? Always seems to be something hiding on me
67Dart273 Well-Known Member Joined Oct 14, 2010 Messages 60,035 Reaction score 33,303 Location Idaho Sep 5, 2015 #2 Uh, three bolts. Service manual? Trot over to MyMopar.
pikewi Comfortably numb Joined Oct 18, 2010 Messages 249 Reaction score 133 Location WI Sep 5, 2015 #3 My manual shows 2 on the R side. Where is the third? Thanks for the quick reply
67Dart273 Well-Known Member Joined Oct 14, 2010 Messages 60,035 Reaction score 33,303 Location Idaho Sep 5, 2015 #4 Manual or power, the bolts are the same
Mopar Tim FABO Gold Member FABO Gold Member Joined Nov 29, 2014 Messages 29,651 Reaction score 29,964 Location vista CA. Sep 7, 2015 #5 One is hard to see on assembled car.
pikewi Comfortably numb Joined Oct 18, 2010 Messages 249 Reaction score 133 Location WI Sep 7, 2015 #6 No chit! I did find it though and managed to get it out. Thanks
mderoy340 Well-Known Member Joined Aug 2, 2012 Messages 2,702 Reaction score 1,633 Location Melbourne FL Sep 7, 2015 #7 While you have it out check the k member area for cracks around the weld areas. Clean the bolt holes and use threadlocker when you put it back in.
While you have it out check the k member area for cracks around the weld areas. Clean the bolt holes and use threadlocker when you put it back in.
pikewi Comfortably numb Joined Oct 18, 2010 Messages 249 Reaction score 133 Location WI Sep 7, 2015 #8 Will do. I plan to take the K member out and will give it a good going over before paint.
Geo4K Just your average Gearhead. Joined Apr 4, 2013 Messages 223 Reaction score 29 Location New Mexico Sep 12, 2015 #9 I had to use a 12 (half inch) point socket to get mine off.
