Stock Rocker Arms on sb Edelbrock Heads .

[jimmer]

Does or has anyone run stock rocker arms on small block Edelbrock heads ?
The plans are to switch to roller rockers later on.
I just had the heads sent off to get ported in Idaho by a guy who is on here. :burnout::burnout:

 

[70aarcuda]

if you are running "Stock OEM" rockers..they fit...but with the increased spring pressure the eddy springs have...they have a tendency to poke a pushrod thru the rockers...

I have used the MP non adjustable rocker ..just like the stock ones but have increased material on the pushrod pad so they do not poke through....

stock ones will fit..

 

[rumblefish360]

Port work by IQ52?

I will
Say if the cam is mild in lift, you'll be OK.

 

[Cumiford]

If your spending that kind of money on eddy heads and porting why not do it right the first time and not run the risk of damaging something?

 

[T56MaxTorq]

If you're talking the stock stamped steel 1.5 rocker, i have ran them in a pinch with a .534 cam and a dual spring with 300 lbs open seat pressure. They showed their age after a couple thousand, easy driving miles. I'm sure the magnum rockers are a little stronger. I wouldn't risk it tho.

 

[jimmer]

Yes IQ52 is porting them. It is not going to be a long term ordeal. I know it has been done before. I just wanted to here peoples exp. Thanks