Mitch get a couple of rings easy hard wire set up you can set them up your self very easy to install just make sure you get the transformer and resistance diode’s and piece of cake
Stop in for a cup of coffee
- Thread starter toolmanmike
- Start date
-
You would have gotten annoyed with the extra cab versus the crew.
Icetech
Well-Known Member
? why? no one but me will ever sit in my truck... cab and a half with a 6ft bed seems decent to me..
Nothing really fits in that jump seat area. A larger box would be a struggle. And road trips, it's nice to have the room....
You do have the tonneau cover though
Icetech
Well-Known Member
yeah.. i have a weird thing bout stuff in the back flying out.. had to get a cover.. i have a bunch of boxes in there i forgot to throw away this morning... just remembered
That cover is a tyger T1... really happy with it so far
A buddy stopped by shop to say hi yesterday, but i was in the house having lunch. He waved at camera and left.
Morning!
3rd cup almost done. Coolish day, cloudy and breezy. Painting today. Instead of washing the old painted osb i give it a quick once over with my orbital,knocks the dust of and cleans up a few lumps.
3rd cup almost done. Coolish day, cloudy and breezy. Painting today. Instead of washing the old painted osb i give it a quick once over with my orbital,knocks the dust of and cleans up a few lumps.
Should have drove the short bus! 
Winter Olympics are 5 months away...
Didn't realize they were even coming. I guess they're getting the NHL players on the team this year?
What a non-event apparently.
Remember when the Olympics were a big deal?
Didn't realize they were even coming. I guess they're getting the NHL players on the team this year?
What a non-event apparently.
Remember when the Olympics were a big deal?
Debating if i should put up some shelves, same height as bottom of window frame, using window ledge as shelf space. It is unlikely i will ever open them, and i wont be running the window shaker a/c in there any more.
- Joined
- Mar 17, 2018
- Messages
- 17,074
- Reaction score
- 41,646
Pant pant
- Joined
- Mar 17, 2018
- Messages
- 17,074
- Reaction score
- 41,646
Bring it to our farm we will be happy to load it up and abuse it for ya! We don’t weigh nuthin, load em up till they squat on the leafs!
Icetech
Well-Known Member
It will lead a life of leisure.. the most that will be in the back will be a engine block
- Joined
- Mar 17, 2018
- Messages
- 17,074
- Reaction score
- 41,646
So on a serious note I have an ole IPod that has the front delaminated almost all the way off, as a result it does not function. It has all my music on it and nothing else. It was for roadtrips on bike. Is an IPod repairable or is it a consumable item?It will lead a life of leisure.. the most that will be in the back will be a engine block
Icetech
Well-Known Member
There are places that will replace the screen but i would get the music off it and on a new device if it were me.. call around though it's usually well under $100 to do a screen
Grass is mowed. Rocker is welded in about 80%. Looking to be a decent day. Last warm day for a bit
Wal Mart run done. Had a little salad for lunch then took a 20 min. snooze. I ran down to the insurance office to confirm that a cancellation notice is ok. (it was as designed) Stopped over and put the bagger on the rider and brought it home. I came in to see what the 2:00 Press conference was all about. Just about crime concerns. No comment of course. Off to cut the grass.
Working on the 63 doing the lower 1/4 on the left side and rocker, filling in the spots that was welded and smoothing them off from being warped from the heat of welding it together. Only way it would show is if someone climbed under the car or if it was on a hoist. I'm picky I guess but seen so many cars that have been restored and never finished right on the underside. Slow going but getting there.
Icetech
Well-Known Member
You can only tell my car is repaired if you look at it
I try not to judge other people's cars if they restore them and not a body man, but when you take your car to a body shop to be fixed and pay to have it done right then it should be done right. I can only do the best I can and hope it turns out good. I'm far from being the best but I am half assed good at it.
One rocker in and one cut out
-
