sure grip!!!!!!

[duster731]

its so hard trying to find a sure grip for my third member does anyone know where i can get one or if you have one, even if its a whole third member.. theres only a couple i found but they want like 400 to 1000 and thats expensive lol i know there not cheap but man. thanks

 

[fstfish66]

did you try doctor diff????

 

[HOTMOPR]

I may have a spare. I'll check tomorrow..

 

[duster731]

did you try doctor diff????

Ya he didn't email me back yet lol

 

[RustyRatRod]

Summit has tons of them.

 

[ALX67dart]

I have an open 2.76 742 case and a cone style suregrip unit. Selling as a pair. $200.00 for both. I work at the University of Souther California in Los Angeles. We can arrange for pickup there. Not sure where in Socal you are.

Alex

 

[duster731]

Ur about an hr away lol sounds good I live in riverside.. pm sent

 

[ALX67dart]

Hey Duster731,

I added pictures so you can see condition.

Alex

 

[daredevil]

looks like a good deal

 

[duster731]

Kool thanks for the pics do you think that this is a bolt in and go or does it need anything and what is the scoring lines along the carrier

 

[ALX67dart]

Both suregrip and case gears look good and spin smooth. I would say yes bolt in and go. But if your budget allows have them inspected to be sure before you install. According to this post: http://www.forabodiesonly.com/mopar/showthread.php?t=142124 its scoring from old gears (pinion backed off) but I'm new to this so i don't know how it affects the unit. Hopefully someone can chime in and let both of us know.

 

[rbdart]

Doesnt hurt the unit at all,seen and used many like this,killer deal,sg alone worth asking price.....better get on it...lol

 

[duster731]

O one more question I have stock b body axles would this work Idk the spine count

 

[crackedback]

Just go get the darn thing... LOL

The marks on the SG aren't a big deal. As long as the pin in the unit is tight, you're good to go. Might even take the two halves apart to inspect it inside. Cost about $40 to rebuild it of less if you have access to a lathe.

8.75 have the same spline count 30... that's not an issue.

 

[ALX67dart]

Thank you, good to hear that scoring has no effect on the unit. Yes, priced for a young gun on a budget!

 

[duster731]

Just go get the darn thing... LOL

The marks on the SG aren't a big deal. As long as the pin in the unit is tight, you're good to go. Might even take the two halves apart to inspect it inside. Cost about $40 to rebuild it of less if you have access to a lathe.

8.75 have the same spline count 30... that's not an issue.

Hey rob Whats all required in rebuilding one and what parts are needed is it a home project nothing special kind of work and is it hard to install it into the case anything special on that or if its to much to explain is there a article or forum on how to rebuild and install it thanks....brandon