transmission bracket for dual exhaust 1965

-

mkingan

Well-Known Member
Joined
Apr 12, 2016
Messages
178
Reaction score
15
Location
arkansas
on my 65 valiant/barracuda, is there a replacement transmission crossmember that is already notched out for dual exhaust? one side is notched other flat or does everyone just cut the other side out? any help apprciated.
 
We offer this......IN STOCK AND READY TO SHIP

Transmission Cross member Conversion for Dual Exhaust
Layson's Restorations has come up with a solution to the Ugly Low Hanging exhaust. The factory cross members for 1963-66 A-body Mopars did
not have a factory cutout on the passenger’s side. This causes any Dual Exhaust Conversions to an A-body to have the Passenger Side Pipe drop
below the cross member in order to get clearance all the way back to the rear valance panel. We have solved this problem by Modifying the Cross-
member to have a factory type cutout on the Passenger side as well. It bolts up the same as your old one and looks factory original. It comes
back to you steamed cleaned and Powder Coated Black.

RN-636TCMC, 1963-66 A-body Tranny Cross member Conversion with Core Exchange $169.00

RN-CORE, Refundable within 90 days of receipt of a good core, $145.00 CORE FEE
PLEASE NOTE: CORES>We accept good cores only - must not be broken, ripped, torn, excessive rust (cancer), or warped to qualify as a good core and MUST be submitted with 90 Days of Invoice Date!!!!

1713379074968.png
 
-
Back
Top