I've been looking all night but cannot find what I'm looking for. I am looking for size comparison pictures between the T56, TKX and T5 transmissions.
Transmission Size Comparison
- Thread starter RustyRatRod
- Start date
-
it's not the size that matters; personality is way more important.
No, I did not. That's pretty much what I was looking for. Thank you!
I'm going to install a T5, but I wanted some comparison so that I could make the tunnel big enough for "something else" maybe on down the road.
It’s a pretty substantial difference from the T5 or TKX to the T56. The tunnel work isn’t wildly different for the sheet metal, but torsion bar crossmember work required is very different. The T56 requires a lot more space back at the crossmember.
Is this gonna end with an argument like “My tranny is bigger than your tranny”? 
Rue Paul fight to the death? Thats just wrong on X mas!
You will also want a T-5 rear tail shaft out of a S-10 to make the shifter land properly in the tunnel, if your not worried wear it lands then you're good to go as is.
No tunnel mods needed for a 67-up A- Body with the exception of the rear crossmember... I think the early A's have no issues either.
Are you using a World Class T-5? Just curious as the housings are the same.. the internals are different.
No tunnel mods needed for a 67-up A- Body with the exception of the rear crossmember... I think the early A's have no issues either.
Are you using a World Class T-5? Just curious as the housings are the same.. the internals are different.
*cough* big block *cough*
Man that's just nasty. lolIs this gonna end with an argument like “My tranny is bigger than your tranny”?
Yes. It's about a 95 model.
I’ve seen somewhere you can get a mock up, not the TKX though.
I have a T5 less than 50 feet away. Trust me, it's gonna get more than mocked up. lol
Nice.
-
Similar threads
