Dkruse Well-Known Member Joined Jun 28, 2015 Messages 645 Reaction score 86 Location Mira loma california Sep 10, 2015 #1 Adjust shifter linkage and loose park or first gear . Help [/URL][/IMG] [/URL][/IMG] Attachments image.jpg 52 KB · Views: 187
R RedFish Well-Known Member Joined Sep 5, 2007 Messages 25,850 Reaction score 5,351 Sep 10, 2015 #2 Sounds like the lever on the trans is the wrong one. Those are of different lengths.
J jasperjacko Well-Known Member Joined Dec 2, 2013 Messages 62 Reaction score 0 Location ohio Sep 10, 2015 #3 Are all the bushings intact and tight? If they're sloppy, you'll have that problem.
O oldkimmer FABO Gold Member FABO Gold Member Joined Nov 11, 2006 Messages 24,127 Reaction score 8,358 Location Kindersley, Saskatchewan, Sep 11, 2015 #4 ........Drill a hole just inboard of the factory hole.......kim.........
mycuda FABO Gold Member FABO Gold Member Joined Feb 15, 2011 Messages 5,217 Reaction score 3,490 Location Chicago/ Metro Sep 11, 2015 #5 I had similar issue putting floor console in column car. I found the linkage bar on the shifter itself in the car was a little bent and needed some tweaking by trial by error. Got it to work normally afterall. Good Luck
I had similar issue putting floor console in column car. I found the linkage bar on the shifter itself in the car was a little bent and needed some tweaking by trial by error. Got it to work normally afterall. Good Luck