Turbo 6.1 Demon

[blown71duster]

I saw these pics on Stage 6 motorsport's facebook. Putting twin turbos on the stock 6.1 made great power for a stock engine. 612 whp on 8.5 psi boost- twin 62's

View attachment 10649448_838533396186946_1230010045892994712_n.jpg

View attachment 10441930_797433400296946_8458931397870609914_n.jpg

View attachment 10694349_856963004343985_60574933351782871_o.jpg


https://www.facebook.com/media/set/?set=a.856962837677335.1073741833.134618456578447&type=3

 

[twayne24365]

Wish i had the dough for a 6.1, they make crazy power per inch. Check out highes engines 426" build. Well over 700 ponies

 

[charger426]

That looks like a lot of work for only 600 rwhp. Why not procharge and just as much if not more?

 

[DNasty777]

That looks like a lot of work for only 600 rwhp. Why not procharge and just as much if not more?

Exactly what I was thinking. Unless of course they build the motor next, and search for 1000.

 

[Cevidicus]

Stage 6 guy told me on Facebook that they were building a forged engine for that car and hope to get 800-850 whp on 93 octane.

Keep in mind that the 600 whp was on a bone stock 6.1 with only 8.5 lbs of boost. That's about the max boost level most guys are comfortable with on stock pistons.

 

[charger426]

Yeah I was looking into the differnt things for a SRT8 challenger before I bought my dart. Seemed like a procharger with 6-8lbs of boost will get you 600 ish and is a bolt on kit. Turbos do have a high potential but for me are still an expensive adventure I know I wouldn't want to be apart of.

 

[Rat Patrol]

Deleted.

 

[sag]

What all is forged in the stock 6.1L?

I wonder what fuel management system they used.....

 

[Rat Patrol]

What all is forged in the stock 6.1L?

I wonder what fuel management system they used.....

Only the crank - rods and slugs are cast.

 

[jos51700]

And STILL no easy turbo manifold for small blocks. Sigh...

 

[Riddler]

Hopefully once my car is built with the 6.1L I'll be able to do a procharger.

Riddler

 

[Joe Dokes]

Nice installation. I think if you're searching for over 800 HP either a huge Kenne Bell blower or turbos.

Personally I think this is a really clean installation, and shows just what good fabrication looks like.

Regards,

Joe Dokes

 

[sag]

I wish some one would start building turbo headers for the new hemi's. heck the other big two have all sorts of turbo headers available:wack:

 

[whitebomber63]

Dear sweet baby jesus.... :cheers:

 

[Buschi340]

you can close the hood. Love ít!

 

[blown71duster]

That Demon now has a Forged 6.1 with Thitek heads and they put it on the dyno .
826whp and 715wtq at 15 psi pump gas.

 

[Cevidicus]

That's pretty damned awesome! Imagine what it could put down with 20psi and 116 race fuel..... Thanks for the update.

 

[ghinmi]

Would make mid 900s @ 20 psi.

 

[MuuMuu101]

It's so beautiful... The only thing that stops me from installing one is how tight everything is. That car also has an RMS so there's extra room for turbos and fun goodies.

 

[kurupt17]

That's pretty damned awesome! Imagine what it could put down with 20psi and 116 race fuel..... Thanks for the update.

Or E85