This is the very last pair of UCA's that i have in my inventory of parts, that i have for sale.
All others have now been sold.
And these 40+ year old cars are not showing up anymore, around my area.
What i have here are a pair of upper control arms that are used on the 1973-76 Mopar A Body cars such as Dart, Valiant,Duster, Demon. These control arms are required to be used on 1972 and earlier A body cars when doing a disc brake conversion to the larger 4 1/2 inch bolt pattern B or E body disc brakes or the 73-76 A body disc brakes.
I cleaned them up of all the grease and grime in the solvent tank, and then soaked them off in a solution of a product called Evaporust, to remove the surface rust from these control arms. You paint them the color, and texture paint of your choice. I will leave that up to you. Very nice sets of upper control arms. One of the best sets that i have come across. Not rust pitted pieces of junk, from the rust bucket states here in the USA. You can't go wrong with parts starting out here in California, Nevada, Arizona.
This is the very last pair of UCA's that i have. This is it, unless i can find some more, to do my thing with them.
Very nice set of UCA's. This set i found last week while making my wrecking yard rounds. These are now the last ones that i have in stock. These 40+ year old cars are not showing up in my area anymore, and these UCA's in this condition are getting really hard to find.
The old bushings were completely shot, and worn out,, in this pair of these UCA's, so i performed the labor in removing them, before i put them up for sale.
I have done all the hard, dirty, time consuming, labor in bringing them back to the condition that you see in all the pictures.
This pair has nice and tight, replacement ball joints in the UCA's so i left them alone, but you will need to buy replacement grease boots for them at your local parts store, or Energy Suspension, thru the internet is another good source.
You buy your own parts, install them, paint them up, and your good to go.
$155.00 For this pair of UCA's with the installed ball joints.
+ FEDEX'ing with insurance, and signature delivery, + 3% Pay Pal fee.
I'm not interested in any "trades" or "offers" other than my stated price.
If interested, send me a pm, and we can go from there.
Thank's a lot.
Jim V.
All others have now been sold.
And these 40+ year old cars are not showing up anymore, around my area.
What i have here are a pair of upper control arms that are used on the 1973-76 Mopar A Body cars such as Dart, Valiant,Duster, Demon. These control arms are required to be used on 1972 and earlier A body cars when doing a disc brake conversion to the larger 4 1/2 inch bolt pattern B or E body disc brakes or the 73-76 A body disc brakes.
I cleaned them up of all the grease and grime in the solvent tank, and then soaked them off in a solution of a product called Evaporust, to remove the surface rust from these control arms. You paint them the color, and texture paint of your choice. I will leave that up to you. Very nice sets of upper control arms. One of the best sets that i have come across. Not rust pitted pieces of junk, from the rust bucket states here in the USA. You can't go wrong with parts starting out here in California, Nevada, Arizona.
This is the very last pair of UCA's that i have. This is it, unless i can find some more, to do my thing with them.
Very nice set of UCA's. This set i found last week while making my wrecking yard rounds. These are now the last ones that i have in stock. These 40+ year old cars are not showing up in my area anymore, and these UCA's in this condition are getting really hard to find.
The old bushings were completely shot, and worn out,, in this pair of these UCA's, so i performed the labor in removing them, before i put them up for sale.
I have done all the hard, dirty, time consuming, labor in bringing them back to the condition that you see in all the pictures.
This pair has nice and tight, replacement ball joints in the UCA's so i left them alone, but you will need to buy replacement grease boots for them at your local parts store, or Energy Suspension, thru the internet is another good source.
You buy your own parts, install them, paint them up, and your good to go.
$155.00 For this pair of UCA's with the installed ball joints.
+ FEDEX'ing with insurance, and signature delivery, + 3% Pay Pal fee.
I'm not interested in any "trades" or "offers" other than my stated price.
If interested, send me a pm, and we can go from there.
Thank's a lot.
Jim V.
