valve cover bolts to short

[68383GTS]

ACE is the place....

 

[95teetee]

Just keep in mind that a bolt strecher will only strech a bolt to 7/9ths past its original length... too many people try to strech them to 11/15ths beyond the original length and this usually causes the bolt to snap and they get mad and throw out a perfectly good bolt streching tool thinking it was the tools fault...:snakeman:

but 7/9ths is more than 11/15ths...

 

[Snake]

Studs and nuts. Only way to go. ACE sells them cheap. Make sure to put a flat washer under the nut

10 4 she has washers under.

 

[1968FormulaS340]

If a bolt isn't long enough, at least beat the hell out of the sides while putting it in, and you should be ok.

 

[one bad 440]

but 7/9ths is more than 11/15ths...

My mistake, I ment 9/7ths and 15/11ths...

 

[moparlover]

Studs and nuts.

there are plenty of those on this site

 

[CudaChick1968]

LMAO moparlover! You are so right ...

 

[fishy68]

there are plenty of those on this site

lmao...:-\"