63 dart wagon
Well-Known Member
Is there a difference between a solid spring and a roller spring. I have a 640 lift roller cam, and a pair of solid springs good to 700 lift. Could i use them?
Thanks. I was just making sure.you should use the spring recommended by the manufacture of the roller cam.....solid roller cams require alot more spring pressure on the seat and over the nose then a flat tappet cam...
have a head man compare the specs at closed -midlift-and open pressure against what springs are recommended, they just might work, if set up by an expert. he`ll check for coil bind too, along w/ guide clearance.Thanks. I was just making sure.
have a head man compare the specs at closed -midlift-and open pressure against what springs are recommended, they just might work, if set up by an expert. he`ll check for coil bind too, along w/ guide clearance.