I am looking at these springs to install on my older grind cam from Hughes. Are there any other sources for same or similar? hoping to save a few bucks..
HUG 1129
DUAL VALVE SPRING
145# @ 1.800" / 358# @ .550" LIFT (PAC SPRING)
$10.00
HUG 1129
DUAL VALVE SPRING
145# @ 1.800" / 358# @ .550" LIFT (PAC SPRING)
$10.00
- Installed Height/Pressure: 1.800"--145#
- Pressure @ .550" lift: 358#
- Pressure @ .600" lift: 375#
- Pressure @ .650" lift: 400#
- Pressure @ .700" lift : 425#
- Coil Bind: @ .750" lift
- Outer Spring ID/OD: 1.075" /1.459"
- Inner Spring ID/OD: 1.078" / .794"
- Type of Spring: Dual
- Retainers: 5/16" -1278 : 11/32" - 1201
Spring Rate 391