Verify Torque specs...

[idrift]

My FSM shows 145 ft lbs torque for the lower control arm pins is this
correct? Seems kind of high. Also, I cannot find a torque for the upper
control arm cam bolt nuts anywhere, is there a recommended spec or
should I just go with standard for a 1/2" bolt?

 

[73Duster]

My manual shows 145 ft. lbs for 1970-1976. It does not show a torque spec for the cam bolt nuts. Just make sure they are good and snug and you should be fine.

 

[jar84203]

Ditto on the 145 and for the cam bolts, my 71 Plymouth shop manual shows 65