what are you blathering on about? none of this makes any sense what so ever, is this even in english?
3 things that will get threads deleted around here are religion, current events and politics. Sometimes all 3 are in one discussion. Often one subject leads to another.
Threads like this one usually end up deleted because they are just trouble from the first post. They are also a pain in the azz for the staff because we either have to babysit them by reading every post, or if we purposely don't pay attention they eventually get out of hand and then there are numerous reports to deal with. That in itself can be a pain. Oh, there is always the "what happened to my thread" follow up threads.
Rubber Neckers.....slows down the traffic to a crawl.....I like to look at crashes too but can't because of all the RN's!
Don't know him well enough to know but know him from wanting to follow 'his' rules. Told him to go start up his own web site as this one isn't his....he got a few days off but came back and picked up the same stick and continued to beat the same dead horse.
Years ago I went to look at a pickup that was at a used vehicle dealership. The 'jerk' on the phone said it was in great shape and needed nothing. The dang thing had bondo all along the lower body and in some spots had newspaper sticking out of the bondo. I asked him for his business card then gave him a good piece of my mind and told him I'd be making copies of his BC and would pass them out to my friends and family.
He's a hack!
It's healthy to have threads like this for a little while. Then, any productivity wears off. That's when people can turn on each other and it gets ugly.3 things that will get threads deleted around here are religion, current events and politics. Sometimes all 3 are in one discussion. Often one subject leads to another.
Threads like this one usually end up deleted because they are just trouble from the first post. They are also a pain in the azz for the staff because we either have to babysit them by reading every post, or if we purposely don't pay attention they eventually get out of hand and then there are numerous reports to deal with. That in itself can be a pain. Oh, there is always the "what happened to my thread" follow up threads.
Agreed. I usually let them run until all Hell breaks loose. Right or wrong.
What gave it away? lol
At least he's using window screen and not wadded up newspaper. It's a used car hack from Bondo Bob!
), I'll skip right over them without a blink!
no no, you're thinking of the guy that thought machine shops were a rip off so he was gonna use a mag drill and hone/next over his block after cutting down some piston crowns with his "ban-saw"
I agree. I am a mod_admin at a firearm outdoor website. We had to warn one guy to stop telling member's to do things not safe and some not legal. After removing post and threads he got a ban.Sure thing. It's all here, and the classifieds section rules are VERY clearly posted at the top of each and every sale forum. People just need to read the rules and follow them. There are good rules established already, nothing is going to be perfect, and the rules we have are all there for a reason.
Oh oh oh! It would be non-conductive as well! You should start a "no weld" distributor thread!
Sarcasm, for those that can't tell (I know 340six can!). Some of the stuff on this board lately!
Sorry, but no. Kemper is the one hijacking all of these threads from the jump. He's the one with the 30 day vacation, and rightfully so.
He's lucky I'm not a mod, I'd delete every thread he's posted for the good of the hobby. Most of his "methods" are pure hackery and have no business being passed off as legitimate. Seriously, it lowers the standard of advice that's being given on this site most of the time.
You don't need to spend tens of thousands to do things so that they're not worse than what you started with. You just have to be willing to learn and put in the work. 90% of his comments are pure lies.
The only thing good about Chad's videos are the comments bashing him.
Shoot.. I remember that guy. Lolno no, you're thinking of the guy that thought machine shops were a rip off so he was gonna use a mag drill and hone/next over his block after cutting down some piston crowns with his "ban-saw"
so, in the same vein as captain bondo hack, but mechanical in nature.
anyway, here's these magnificent gems:
and yet your still here
Dat's some funny stuff!!no no, you're thinking of the guy that thought machine shops were a rip off so he was gonna use a mag drill and hone/next over his block after cutting down some piston crowns with his "ban-saw"
so, in the same vein as captain bondo hack, but mechanical in nature.
anyway, here's these magnificent gems:
Saw a piston off with some cheap China band saw. And bore a block with router.
just like Facebook Posts
