What tranny cooler for 9.5 Dynamic converter

[ProStreetDuster]

Dynamic recommends a B&M Super cooler for their 9.5" Race/Street, so I'm wondering what's the best size to get. It will be in a daily driven A body, that will do some track time.
I'm in California so the summers can hit 100-115 Deg, while the winters are never below 30 Deg.

I'm looking at the coolers here
http://www.jegs.com/p/B&M/758370/10002/-1


I'm kinda leaning towards this one.

Racing Transmission Cooler
29,200 GVW
29,200 BTU
11'' x 11'' x 1-1/2''

Any recommendations?
Is there any problems with going to big cooler wise?

 

[demon seed]

I'm guessing that you're running a 727 but what kind of HP are you running through it. That 11x11 is plenty big, to give you an idea I'm running the 11x8 with a 3000 stall but I also added a 2 quart larger aluminum pan for more cooling and capacity. You gotto make sure that your cooler isn't so big that it's cutting back air flow to a large part of the rad.

Terry

 

[ProStreetDuster]

Yea, I guess giving you some motor and tranny info might be nice huh LOL
It's actually a 904 tranny, with a deep Mopar performance pan, transgo shift kit, HP clutches etc, with a 360 that's somewhere around 400 HP. 4:10 gears.

 

[SRT_DSTRHOLC]

Thats somewhat of my specs the Trans cooler I will be using is 8X11 but its 1 1/2 thich

 

[stroked 340]

Any tranny cooler is a good investment for your car..i believe i run the 11x11 b.m. on my duster with a built 904,full manual v.b. ,3800 9 1/2 converter ,deep mopar pan i run my car very hard at the track and have'nt had any issue with over-heating it..blowing-up motors that a different story..lol..

 

[oldkimmer]

................This is 1 time where bigger is better............kim......