Wheel Identification please

[Diesel1276]

Can I have some assistance identifying these two wheels? I was told mopar A body. 15x6 measurements with about 4” backspace. Photos attached with identification stampings. Stampings are 30, K2, PP, TC over M in lug nut are on front. Tahnks!

 

[Professor Fate]

B or C body, maybe FMJ or R body. NO A body EVER came with 15" wheels from the factory (Okay, okay- the LO/BO Hemi Superstockers did... but that's it).

 

[69FBCuda]

Look by the valve stem.

 

[Professor Fate]

Look by the valve stem.

Or stamped on the inside of the rim.
Also check the center register diameter to make sure it's not a Ford or AMC wheel. Mopar BBP center register is ~2.81".

 

[Diesel1276]

B or C body, maybe FMJ or R body. NO A body EVER came with 15" wheels from the factory (Okay, okay- the LO/BO Hemi Superstockers did... but that's it).

I didnt think they were A body but wanted to make sure they were def mopar because I couldnt find a site with those I.D. Marks. The Guy had them with Ford steelies and I could see the difference in all the wheels. I need my poverty caps to fit. Thank You.