wheelstand cars Post your pic's here

[waggin]

any up close pic's of how they were built inside the cab anything I can use for information of how they were done back in the day will be helpful as this is on my to do list ( see attached pic's ) I have been gathering parts for this car for some time to build a pro street car,that has taken a new direction,there are plenty of go fast pro streeters out there, this is all about the wheelie!!!!!!!

 

[Dart_Doctor]

Hells to the ya !

 

[Bulldozer]

a couple for now...

 

[dge467]

:glasses7:

 

[younggun2.0]

any up close pic's of how they were built inside the cab anything I can use for information of how they were done back in the day will be helpful as this is on my to do list ( see attached pic's ) I have been gathering parts for this car for some time to build a pro street car,that has taken a new direction,there are plenty of go fast pro streeters out there, this is all about the wheelie!!!!!!!

i could be wrong here but..... with the dana in backwards wont the rotation be backwards?

 

[George R]

Waggs,
I'm no expert, but I think you have the engine facing the wrong way in your drawing.

Geo

 

[waggin]

I'm gonna use a ring and pinion from a dana 60 front axel, you are correct and very observant........anyone with those parts please let me know

i could be wrong here but..... with the dana in backwards wont the rotation be backwards?

 

[waggin]

I have exactly six foot of cabin space to mount the whole deal, the rear axel is dead center of that, i can put the engine either way,mid engine such as hemi under glass or la dart style all the way to the rear.....

Waggs,
I'm no expert, but I think you have the engine facing the wrong way in your drawing.

Geo

 

[mullinax95]

This is going to be a interesting build.

I never been in a wheel stand car of course but how do those see where they are going?

 

[dusted72]

This is going to be a interesting build.

I never been in a wheel stand car of course but how do those see where they are going?

Depending on the lane you either watch the wall or center line.

 

[waggin]

I will be putting a clear lexan firewall and floor in the areas of vision I will need, my wheelstander will be doing something not done before that i know of, yea some wheelstands on a dragstrip has been done and wheelstands on the straightaways at oval tracks has been done.....I'm goin figure 8 , prolly practice the oval first then move on to the tricky figure eight, some may consider this undoable...i love to here them say you caai'nt...Dooooooo That!!!!!!! 15 years of pro figure eight racin I can do it!!! Iv'e flown a car before!!!! was a short flight but the landing was spectacular roflmao!!!!!......Wagg's

This is going to be a interesting build.

I never been in a wheel stand car of course but how do those see where they are going?

 

[waggin]

well today is just one of them great day's....pfogal just called me and is excited about the build and offered up one of his funneltunnel sheetmetal intakes for the build.....we gonna see what to do for induction on top of that he say,s some type of injection but also think's we can do it with carbs if we think outside the box.....Off to pat's I go.........stay tuned for napkin drawings..........

 

[Bulldozer]

a couple more for ya

 

[Bulldozer]

a few more

 

[waggin]

that first pic of hemi under glass....the rearend looks like the pinion is facing the rear of the car!!!!!!!!!!!!!!

a couple more for ya

 

[Bulldozer]

yes it is Waggs...here are couple more of the LA Dart....

 

[Bulldozer]

here are some more Waggs...

 

[Bulldozer]

a couple more

 

[waggin]

that sure looks like a transfer case in that pic!!!!!!!! Now i'm really excited !!!!!!!!!!!

here are some more Waggs...

 

[Bulldozer]

Waggs a little info here and photos.... http://public.fotki.com/VincePutt/d...opar-wheelstanders/65hursthemiundergla-6.html

pics are protected or i would just post them. if you go backwards there are some cool pics

i got a couple out of it....

 

[A38Valiant]

I'm gonna use a ring and pinion from a dana 60 front axel, you are correct and very observant........anyone with those parts please let me know

Why not use a Dana 60 rear axle flipped upside-down and facing rearward? Just don't forget to weld the vent shut and drill a new one. Another thought, although I'm not sure how well it would work, is a 4X4 transfer case, just running through the "front" shaft. Thinkin' maybe the old iron New Process from a 70's Dodge pickup. Think the number was NP203. This would give you 2 speeds, "4 HI" and "4 LO", which should both equal the front 2 High!

 

[mguner]

:glasses7:I have a Clark Cortez transaxle that might come in handy for something like this.....

 

[waggin]

what is a clark cortez transaxle???

:glasses7:I have a Clark Cortez transaxle that might come in handy for something like this.....

 

[waggin]

how bout a 205 divorced transfer case??? up to 800 hp like the one here in the back of the "Waggin" ???

 

[tiltsix]

I bought a np 205 about 6 months ago for 95.00,couldnt pass it up...............Jeff