MikeStahl Well-Known Member Joined Jan 15, 2011 Messages 129 Reaction score 1 Location Lynnwood Wa Jun 15, 2011 #1 Like to know the casting #'s for C body can be used for a 400 install thx Mike
J Jim Lusk Well-Known Member Joined Mar 8, 2006 Messages 6,212 Reaction score 3,157 Location Fresno, CA Jun 15, 2011 #2 The B-body ones clear the steering shaft better.
O oldkimmer FABO Gold Member FABO Gold Member Joined Nov 11, 2006 Messages 24,171 Reaction score 8,387 Location Kindersley, Saskatchewan, Jun 15, 2011 #3 .........I use 2863409.....2806900.........u need to angle mill the drivers side 1/16.................kim...........
.........I use 2863409.....2806900.........u need to angle mill the drivers side 1/16.................kim...........
T truckerlee379 71 demon Joined Jun 9, 2011 Messages 41 Reaction score 0 Location ohio Jun 15, 2011 #4 ???is the 06900 the pass side??and will the other one fit with a 4 speed??if so which way is the mill cut??i doing a 383 in my demon...thanks for the help Lee
???is the 06900 the pass side??and will the other one fit with a 4 speed??if so which way is the mill cut??i doing a 383 in my demon...thanks for the help Lee
J Jim Lusk Well-Known Member Joined Mar 8, 2006 Messages 6,212 Reaction score 3,157 Location Fresno, CA Jun 16, 2011 #5 The angle mill needs to bring the outlet flange toward the block.
MikeStahl Well-Known Member Joined Jan 15, 2011 Messages 129 Reaction score 1 Location Lynnwood Wa Jun 16, 2011 #6 Thx that helps send me in a direction