meathead66
Mod Top
Does it matter which port I use for an oil temperature sender? Or do I need a T for pressure sender and temp sender?
which port for oil temp sending unit?
- Thread starter meathead66
- Start date
-
Jlcaptain24
Well-Known Member
Either will do it i believe...I used one for gauge and the other for an idiot light i wired up. It was a 440 though...pretty sure it's the same deal.
If it's a small block, use a tee. The pic looks to be a big block
Jlcaptain24
Well-Known Member
Duh...he's right. It's a big block
yellow rose
Overnight Sensation
Oil temp should be in the pan.
67Dart273
Well-Known Member
^^THIS RIGHT HERE^^
moper
Well-Known Member
X3.
If you are going to install it in the galley with the pressure sender don't spen the money on the gage. It won't read reality anyway.
Garry in AZ
Building a 9 second Valiant
I agree with the above... the oil temp sensor really does need to go in the pan if you want real data from it.
Garry
Garry
meathead66
Mod Top
Bought the bung which needs to be welded into the pan. Should be the best way to go. Would have preferred to put it in the drain plug hole but haven't found an adapter for the Autometer sending probe. Don't see why one wouldn't be available. Oh well.
-
