Dubs Chops
Well-Known Member
Guys I am wanting to install custom gauges in my 68 dart resto. All the pre made dash inserts are for 70 and up. If I am losing all the original stuff will a custom panel physically fit inside the hole on a 68?
will a 70 and later dash fit in a 68, custom Gauge setup
- Thread starter Dubs Chops
- Start date
-
Dubs Chops
Well-Known Member
Any help here gang?
Only difference im aware of is whether it's a rally dash or non rally...
If your current cluster is rectangular the 70 should fit.
If your current cluster is rectangular the 70 should fit.
67Dart273
Well-Known Member
I don't know.........post some links/ photos of what you are looking at?
Sounds like the aftermarket gauge "inserts" he is referring to are for 70 and up non rally dusters, demons, valiant, etc.
You will most likely need to cut and modify your dart dash frame to fit the bigger duster style gauges in.
You will most likely need to cut and modify your dart dash frame to fit the bigger duster style gauges in.
Cal Tonsley
Well-Known Member
I know it’s a bit different with our Australian built Dodge Darts but thought I’d share what I managed to do with my 69 by designing a panel, laser cutting it, vinyl wrapping it with a brushed aluminum finish and fitting it up with Speedhut gauges.
Last edited:
Dubs Chops
Well-Known Member
That looks great and I think would actually work for my dart. Its a similar shape anyways!
Dubs Chops
Well-Known Member
Here is my actual dash.
-
