Wicked31
Well-Known Member
Looking for a solution to a problem I'm having on the install of wilwood rear discs w/ e-brake. I have an a-body 8 3/4 housing with 5x4.5 dr diff axles w/green bearings. The problem I'm having is caliper to disc distance. After installing everything by the instructions the caliper with no shims is too tight to the disc on the outside. Can't even get a pad in there. Has anyone else had this problem and what's a good fix? The only solution I can think of is using the green bearing retainer between the housing and backing plate but not sure that will work.