Wiper hose location

-
7

70Duster340

Well-Known Member
Joined
Jul 20, 2005
Messages
441
Reaction score
72
Location
Cortland, Ohio
Can anyone here maybe send me a good picture of how you routed the wiper hoses? My Duster was purchased from the previous owner without a washer reservoir, hoses, and nozzles. I have collected a new washer reservoir, nozzles, and an electric pump. Unfortunately, I can't find anything in the service manual that shows how to route the hoses.
Thanks
 
From pump motor to 1 to 2 splitter.

One leg goes to drivers squirter

The other goes to the pass side squirter.

There are 2 screws that have a hold down one is visible above the wiper motor the other is above the master cyl

Screenshot_20240227-203546.png



I can get better photos of you need them.

This is a manual pump setup but most is the same if you have electric.

From green on reservoir up to cowl to green on the splitter

Blue and magenta along cowl to respective locations


Red X is the grommet through the firewall for manual
Screenshot_20240227-204052.png
 
Last edited:
Thanks for all the responses, folks. Very much appreciated .
What size is the hose from the reservoir to the splitter? And from the splitter to each nozzle? I ask because the hose from the reservoir to the splitter appears larger than the ones from the splitter to the nozzles.
 
Dana67Dart said:
From pump motor to 1 to 2 splitter.

One leg goes to drivers squirter

The other goes to the pass side squirter.

There are 2 screws that have a hold down one is visible above the wiper motor the other is above the master cyl

View attachment 1716213731


I can get better photos of you need them.

This is a manual pump setup but most is the same if you have electric.

From green on reservoir up to cowl to green on the splitter

Blue and magenta along cowl to respective locations


Red X is the grommet through the firewall for manual
View attachment 1716213733
Click to expand...
That's a very informative picture!
Thanks
 
Does anyone know what size the tubing is for the windshield washer, from the reservoir to the splitter, and from the splitter to the nozzles?
 
0.192 is the OD of the tube of on the pump.

0.141 OD for the pipe on the squirter

PXL_20240229_204018001.jpg


PXL_20240229_203932787.jpg


PXL_20240229_203939726.jpg


PXL_20240229_203945535~2.jpg


PXL_20240229_203952517.jpg


Note the R and L on the squirter

PXL_20240229_204009977.jpg
 
You must log in or register to reply here.
-

Back
Top