1. alexk90

    alexk90 Well-Known Member

    Messages:
    60
    Likes Received:
    17
    Joined:
    Jul 5, 2015
    Location:
    Lincoln, Ne
    Local Time:
    10:04 AM
    Hey everyone,

    So the car i am working on at the moment has a painless wiring harness in it. Sadly the previous owners did a horrible job and ruined the harness. I have no idea what they did and I am just going to pull it out. They for some reason spliced onto the harness and did a bunch of stuff, it is a nightmare.

    Now the question is that I am getting rid of the radio and a couple other components in the car. What would you suggest for a wiring harness? I plan to upgrade ignition and add electrical fan and water pump.
     
  2. halifaxhops

    halifaxhops It's going to get stupid around here! FABO Gold Member

    Messages:
    49,363
    Likes Received:
    17305
    Joined:
    Jan 20, 2014
    Location:
    CENTRURAL, PA
    Local Time:
    11:04 AM
    Start with a new harness.....again prob cheaper in the long run and less ass pain.
     
    • Agree Agree x 1
    • ScampMike

      ScampMike Despicable Damn Yankee FABO Gold Member

      Messages:
      34,092
      Likes Received:
      8857
      Joined:
      Oct 26, 2015
      Location:
      all Mopar driveway
      Local Time:
      11:04 AM
    • 1963dartgt

      1963dartgt Well-Known Member

      Messages:
      502
      Likes Received:
      142
      Joined:
      Nov 7, 2015
      Location:
      CA
      Local Time:
      10:04 AM
    • Darter6

      Darter6 Well-Known Member

      Messages:
      3,755
      Likes Received:
      875
      Joined:
      Jan 16, 2008
      Location:
      Nevada
      Local Time:
      8:04 AM
      I like the EZ kit because it only has 12 circuits. Most of the stuff I do, the cars are quite basic. I think my 63 that I am about to do has only 6 from the factory. Like you, most of the older cars have been butchered over the years.
       
      • Like Like x 1
      • inertia

        inertia Well-Known Member

        Messages:
        3,124
        Likes Received:
        458
        Joined:
        Feb 4, 2011
        Location:
        Victoria B.C. Canada
        Local Time:
        8:04 AM
        Crimping, beer drinking,? ?
        You didn't have anything to do with the OP's car problem, did you ? ?
        Crimping ? ! !,.
        Mosta today's elec problems imho..
         
      • dukeboy_318

        dukeboy_318 Our Lives, Our Fortunes and Our Sacred Honor. FABO Gold Member

        Messages:
        31,202
        Likes Received:
        10450
        Joined:
        Jan 19, 2007
        Location:
        la la land
        Local Time:
        11:04 AM
        completely second this^^

        I've been reading a lot of good things about Rebel recently.

        Rebel Wire .:. Wire Kits for Real Rods
         
      • 1963dartgt

        1963dartgt Well-Known Member

        Messages:
        502
        Likes Received:
        142
        Joined:
        Nov 7, 2015
        Location:
        CA
        Local Time:
        10:04 AM
        Yeah i crimped the connectors onto the end of the wire before i inserted the wire into the weatherpak connector. Maybe you shouldn't be such a tool and have a beer and calm down.
         
      • General Disarray

        General Disarray Well-Known Member

        Messages:
        164
        Likes Received:
        118
        Joined:
        May 4, 2018
        Location:
        South Park
        Local Time:
        9:04 AM
        Look at the Ron Francis kits, too. They have several kits with a range of circuits. I use their kits for race cars and have found their tech support good. I like American Autowire for street cars.
         
      1. This site uses cookies to help personalize content, tailor your experience and to keep you logged in if you register.
        By continuing to use this site, you are consenting to our use of cookies.